Vgate vLinker MC+ ELM327 OBD2 Car Scanner WIFI for BimmerCode FORScan Bluetooth

Description: Vgate vLinker MC+ ELM327 BT4.0 OBD 2 OBD2 Scanner WIFI for BimmerCode FORScan For Android/IOS ELM 327 V 1 5 Purchase Notes： 1.Our products support popular software such as:BimmerCode/Torque/ Forscan/JScan/Auto Doctor/OBD Fusion etc.,We only sell adapters to be compatible with these software, but some of the functions of the software or the software itself are not free, you need to pay additional fees to the software company 2.If your mobile phone is IOS, when you use BT4.0 Ver., please connect to BT directly in the software,Don't connect to BT in phone settings.If you are using MC BT version on Android, you need to press the switch first, and then search for BT：vlinker MC-Android 100% Original Vgate vLinker BT3.0/4.0/WIFI: compatible with 99%+ world car models 1.Data buffer up to 2K bytes, UART baud rate increased to 230. 4 Kbpsc 2.Support Almost All ELM327/ELM329 Adapter Software 3.Automatic sleep and start to reduce power consumptione 4.OBD2 Standard Protocols+More protocols 5.Support user-defined commands 6.Request bytes up to 48 bytes 7.Support Firmware Update 8.Support user-defined APP 9.Support GMLAN and HS/MS-CAN (for Ford/GM) 10.15 ELM protocols/23 STN protocols/64 User-defined protocol Rich instruction set, compatible with more APP software： -- Fully compatible with ELM's AT command set; -- Fully compatible with STN's ST command set; -- Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN; --39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps. -- Compatible with ELM and STN power management solutions. -- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep; -- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode. -- Device sleep power consumption is less than 2 mA. -- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication. -- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps. -- 256-byte storage unit -- More than 100,000 erasable times -- Read and write operations on any unit in the storage area by using the VT command -- Mix ID Sending" mode of CAN protocol. -- Optional formatted send data according to protocol -- Multiple WM sequence settings -- Support AT command to manually set WM sequence -- Support for specifying a protocol or a full protocol-wide temporary WM sequence -- Support for a permanent link between a protocol and a private WM sequence -- Secure bootloader for easy firmware updates Special Function: Fully automatic identification of vehicle protocols,quick reading of vehicle information Fully automatic standby/start,no manual switch button required Connection method: BT4.0/3.0： 1.Turn on theIgnition in the car 2.Plug in the adapterinto the OBD Port 3.Turn on BT,BT only needs to be turned on 4.Open OBD Auto Doctor choose “Extras” ，cick “Connectivity”,choose “BT”and “vLinker MC+” Drop out software and Enter again WIFI： 1.Turn on theIgnition in the car 2.Plug in the adapterinto the OBD Port 3.Turn on WIFI,connected “vLinker” 4.Open OBD Auto Doctor choose “Extras” ，cick “Connectivity”,choose “WIFI”，Drop out software and Enter again 1 x Vgate vLinker WIFI/BT3.0/BT4.0 1 x User manual

Price: 38.12 USD

Location: Houston, Texas

End Time: 2024-08-04T02:13:50.000Z

Shipping Cost: 0 USD