Sony Tektronix 370A Programmable Curve Tracer, w/Safety Cover, Works

Description: Tektronix 370A Programmable Curve Tracer, Fully Operational, Good CRT, Passes all Self-Tests The 370A, the world standard for high resolution curve tracers is used in a wide variety of applications. The 370A performs DC parametric characterization of transistors, thyristors, diodes, SCRs, MOSFETs, optoelectronic components, solar cells, solid state displays and other semiconductor devices. In the R&D lab, it is used for characterization of new designs, extraction of SPICE parameters, failure analysis and data sheet generation. In manufacturing test, the 370A is used to verify device quality and process monitoring. The 370A is used for incoming inspection to verify device performance, perform failure analysis and to match components. Interactive Programmable Control Interactive control of all measurements is accomplished from the full featured front panel or over the GPIB. Operating parameters can be adjusted and stored and recalled using several storage methods including the 370A nonvolatile memory, the built-in MS DOS-compatible floppy disk or to an external controller. Test Fixturing A test fixture is a standard accessory that provides safe device enclosure to ensure operator protection during measurements. The test fixture accommodates standard A1001 through A1005 adapters with Kelvin sensing, 3-Pin adapters without Kelvin sensing and the A1023 and A1024 surface mount adapters. Features: High Precision Measurements of Semiconductor Devices Up to 2000 Volts or 10 Amp SourcingUp to 220 Watts1 Nanoamp Measurement Resolution Down to 2 Millivolt Measurement ResolutionWaveform ComparisonEnvelope DisplayWaveform AveragingDot CursorKelvin Sense MeasurementsFully Programmable3.5Inch MS DOS Compatible Disk Storage to Save and Recall Setups Applications: Manual or Automated High Resolution DCParametric Characterization of SemiconductorsIncoming InspectionManufacturing TestProcess Monitoring and Quality ControlData Sheet GenerationComponent MatchingFailure AnalysisEngineering Specifications: Characteristics Modes AC, ±DC, ±Leakage, ±Rectified Sine Range Max Peak Current (±) Peak Current Pulsed (±) (Collector supply is not pulsed; assumes a pulsed step generator supply) 16 V 10 A 20 A 80 V 2 A 4 A 400 V .4 A .8 A 2000 V .05 A .1 A Step Generator Modes Stair step: DC, 80 µs pulse, 300 µs pulse Step Range Current: 50 nA to 200 mA in 1-2-5 sequence Voltage: 50 mV to 2 V in 1-2-5 sequence Offset Up to ±10X step amplitude No. of steps 0 to 10 MEASUREMENT CHARACTERISTICS Collector Current Measurement range: 100 nA/div (1 nA resolution) to 2 A/div Accuracy: 1.5% of cursor readout +0.05 div of setting (with dot cursor) Emitter Current Measurement range: 1 nA/div (10 pA resolution) to 2 mA/div Accuracy: 1.5% of cursor readout +0.05 div of setting +1 nA Safety UL1244, CSA231, HD401 S1

Price: 5250 USD

Location: Terrell, Texas

End Time: 2024-11-10T20:50:29.000Z

Shipping Cost: 200 USD