Roscoe's Track Spikes, Tiny Size, N, HO, HOn3, On3, On30

Description: Realistic Size Spikes Are Available Again!!! I got tired of scrounging up Micro Engineering "Micro Spikes" for my layout since they are no longer available! So... I started manufacturing my own! First I developed my "Itty-Bitty" spike in the exact same dimensions (3/16" length x .011 x .020) as the ME "Micro" size, perfect for HO, HOn3 and N gauge! Then, taking it a step further, I developed a slightly longer and thicker (1/4" length x.013 x .020) "Tiny-Spike" that is perfect for HO, On3, On30 gauge. The 1/4" length holds a little better (although gluing is recommended with both sizes) and looks "just right". The 3/16 length is slightly lower profile on the rail and is best for N and HOn3. See pictures of some of my track with the "Tiny" spike, 4 per tie, with code 83 rail and On3 ties. Also, the last two pictures are of the "Itty-Bitty" spikes with code 55 rail and HO ties. I have spiked about 10,000 of these babies so far and am very pleased with the results. With spikes this small, I highly recommend pre-drilling the ties. I use #78 drill for "Tiny" size and #79 for "Itty-bitty" but this can vary with hardness of ties. So you may need to experiment a little. I also strongly recommend gluing the bottom of the rails (I use Pliobond) for a very durable installation, as well as better managing the gauging of the rails while spiking. I also use a modified curved tweezer to hold and drive these realistic-sized spikes. You may be able to use one of the commercially available pliers, but you may find they feel a bit "wobbly" due to the thin cross-section of the spikes. I may make tweezers available in the future if demand is there from those who don't want to produce their own. Each package contains at least 1000 spikes by weight. One shipping charge for unlimited number or packages purchased. If the "quantity available" counter is running low, contact me for your needs. I can produce any quantity you require!. Price is for a single package of spikes. This auction is for the "Tiny" size, 1/4 in. length spikes. If you want the "Itty-bitty", 3/16 in. length spikes see my other auction.

Price: 16.95 USD

Location: Spokane, Washington

End Time: 2024-08-03T00:02:11.000Z

Shipping Cost: 6.95 USD