140W USB-C Fast Charge Trigger Board Module PD/QC Decoy Board PD3.1 28V/36V/48V

Description: 140W USB-C Fast Charge Trigger Board Module PD/QC Decoy Board PD3.1 28V/36V/48VProduct Image: Product Description: Features: 1. This PD3.1 deception female board uses the market's mainstream interface Type-C female connector as the input terminal, which is easy to use. 2. This decoy uses a PD3.1 charging head and a dual TypeC male cable with an E-marker chip that is compatible with the EPR protocol and can read the 28V/36V/48V voltage in the PD3.1 mode. 3. 2 styles are available, the load end is with over 10A high current binding posts or without binding posts. 4. The one without binding posts is equipped with a large soldering pad, which is convenient for soldering wires. 5. The heat dissipation effect is good, and the copper on the back is beneficial to heat dissipation and reduces impedance. Introduction: The TypeC female socket is the input terminal. With the PD3.1 charging head and the double TypeC male cable with E-marker chip compatible with the EPR protocol, it can read the 28V/36V/48V voltage of PD3.1 mode, the specific voltage gear and charging It is related to device limitations. Currently, most fast charging chargers on the market are mainly 140W/28V5A. The PCB circuit is designed to exceed 8A, and the load end is a high-current terminal of over 10A or without a terminal (without a terminal, you need to solder the wires yourself), with a large soldering pad for easy soldering. Laying copper on the back facilitates heat dissipation and reduces impedance. Product parameters: Input interface: Type-C female socket Support protocol: PD3.1 Voltage: 28V/36V/48V Size: 25*9.9mm Introduction to voltage selection instructions: When the H/L pad is empty, it is a constant voltage 20V gear (if the input power supply does not have 20V, the default selection is 15V/12V/12V/5V within 20V) The L pad and the small resistor on the right are short-circuited to the constant voltage 28V level (if the input power supply does not have 28V, the default selection is 20V/15V/12V/12V/5V within 28V) The H pad and the small resistor on the left are short-circuited to the highest constant voltage of 48V (if the input power supply does not have 48V, the default selection is 36V/28V/20V/15V/12V/12V/5V within 48V). Note: Most of the current ones on the market The fast charging charger is mainly 140W/28V5A. Kind tips: For a charger that complies with PD3.1, the connected dual TypeC male cable must support PD3.1 (with an E-marker chip compatible with the EPR protocol) to trick the PD3.1--28V/36V/48V voltage. Unable to boost voltage to [28V/36V/48V] Reasons: 1. The charger does not support PD3.1 [28V/36V/48V]. 2. The connected dual TypeC male cable does not support PD3.1 (it does not have an E-marker chip or it has an E-marker chip but is not compatible with the EPR protocol). 3. The charger and decoy are not compatible. Product List: 1X module FeedbackWarrantyShipmentFeedbackWe appreciate your feedback very much. As it will motivate us do better. If you have any questions with our goods or service, Please kindly contact us firstly before leaving negative feedback. Thank you in advance Warranty1. All merchandise will be carefully test before shipping. We will try our best to avoid any quality problem. 2. We promise warranty for quality in one year and we will repair it free of charge. The returning shipping should be paid by customer. 3. If you are not satisfied with the product, Please contact us. We'll provide you a satisfying solution.Shipment1.Normmly we will send the goods within 1-3 working days after your payment is verified . 2.Please check if the goods are in good condition and sign before the delivery man leaves.If you find the product is lost or damaged on the way. Please take photo and let the delivery men confirm it. Then we will help you let the shipping company compensate you.On Jun 19, 2024 at 00:01:18 PDT, seller added the following information:

Price: 1.51 USD

Location: 深圳, 廣東省

End Time: 2024-12-19T04:19:08.000Z

Shipping Cost: 3 USD